EXHIBITORS

Precise determination of the product moisture and bulk density (kg/hl) of the entire grain of agricultural grain crops. Standard version for field beans, spelt, durum, peas, barley, oats, maize, rapeseed, rye, soya beans, sunflower, triticale, wheat and sorghum.

The Granolyser HL supplements the well-tried NIR analysis device with a module for bulk density. A large sample (600 mL) is poured in. The touch screen is used to start the measurement and make the required settings. A long-life halogen lamp with controlled light intensity illuminates the sample. The sample material is continuously transported, the reflection of the sample is scanned in the NIR range and the material is then poured into the bulk container. The weight of a 500 ml sample is determined using an integrated weighing system. As well as different grain types (wheat, rye, barley and maize) oil seeds (rapeseed and sunflower seeds) can also be measured. Grain legumes such as peas and broad beans can also be measured. The important parameters of moisture, protein, sedi, gluten, oil content and starch are supplemented by the hectoliter weight (bulk density) in the Granolyser HL. The measurement result is shown on the display and printed out. The Granolyser HL with LAN and USB interfaces also has the same connectivity as the Granolyser.

Pour the sample (11 mL) into the bottom part of the measuring cell and screw the measurement cell together using the ratchet. Fit the measurement cell to the measuring instrument, turn the switch to the relevant product and press the measuring key. The HE 50 carries out the measurement in seconds, automatically corrects the temperature and displays the measurement result. The measurement cell, which has been specially developed for agriculture, allows a wide range of products to be measured. The homogenization of the sample in the measurement cell provides the optimum prerequisites for accurate moisture measurement. The HE 50 is therefore extremely reliable with freshly harvested grain up to the high measuring range. The HE 50 can be calibrated for more than 200 different products, and is therefore the most versatile moisture meter on the market. Calibrations for peanuts and false oat-grass, grasses and other grain crops are also available.

The HE lite measures the conductivity and temperature of a crushed grain sample. State-of-the-art measurement technology calculates the exact moisture value from this. The integrated measurement cell of the HE lite is based on the Pfeuffer principle which has been well-tried for more than 45 years: The sample is crushed and homogenized at the same time by special grinding discs. The HE lite is therefore extremely reliable with freshly harvested grain. Pour the sample into the beaker built into the top of the measuring cell (11 mL) and put it into the grinding chamber. Fit top part and screw together as far as possible. Then switch on device, select type of grain and trigger a measurement. The measurement result appears on the display after a few seconds.

The GT 1 temperature measuring probe is suitable for measuring in batches at different depths and on the surface. It has two temperature sensors, one in the measuring tip and one in the display housing. The temperature measurement is within the range of -10 °C to +70 °C in loose agricultural bulk materials such as grain, silage, compost, hay and straw.

Insert the cut-off slide into the Chondrometer. Insert plunger weight and pour in the grain sample. Pull out the cut-off slide quickly. The plunger weight and the grain fall into the bottom part of the Chondrometer. Cut the volume exactly using the cut-off slide. Pour out surplus grain and weigh the contents on the compact digital balance. The bulk density (kg/hl) of the different grain types is then determined on the basis of the provided calibration chart.